Convertidor de dosis absorbida por la radiación

Comprehensive Radiation-Absorbed Dose Converter

Radiation-absorbed dose quantifies the energy deposited by ionizing radiation in a unit mass of material. Expressed in rad (rd) or gray (Gy), it is a critical parameter in radiological protection and dosimetry. Our Radiation-Absorbed Dose Converter allows you to convert between various units—from the SI base unit (rad) to larger multiples (exagray, petagray, teragray, gigagray, megagray, kilogray) and smaller multiples (hectogray, dekagray, decigray, centigray, milligray, microgray, nanogray, picogray, femtogray, attogray). It also covers related units like rad/second, joule/kilogram/second, watt/kilogram, sievert/second, and rem/second.

¿Qué unidades están cubiertas?

Our converter supports a complete list of radiation-absorbed dose units with conversion factors defined relative to rad [rd]:

• Rad [rd] (unidad base)

• Millirad [mrd]: 1 mrd = 0.001 rd.

• Joule/kilogram [J/kg]: 1 J/kg = 100 rd.

• Joule/gram [J/g]: 1 J/g = 100,000 rd.

• Joule/centigram [J/cg]: 1 J/cg = 10,000,000 rd.

• Joule/milligram [J/mg]: 1 J/mg = 100,000,000 rd.

• Gray [Gy]: 1 Gy = 100 rd.

• Exagray [EGy]: 1 EGy = 1.0E+20 rd.

• Petagray [PGy]: 1 PGy = 1.0E+17 rd.

• Teragray [TGy]: 1 TGy = 1.0E+14 rd.

• Gigagray [GGy]: 1 GGy = 100,000,000,000 rd.

• Megagray [MGy]: 1 MGy = 100,000,000 rd.

• Kilogray [kGy]: 1 kGy = 100,000 rd.

• Hectogray [hGy]: 1 hGy = 10,000 rd.

• Dekagray [daGy]: 1 daGy = 1,000 rd.

• Decigray [dGy]: 1 dGy = 10 rd.

• Centigray [cGy]: 1 cGy = 1 rd.

• Milligray [mGy]: 1 mGy = 0.1 rd.

• Microgray [µGy]: 1 µGy = 0.0001 rd.

• Nanogray [nGy]: 1 nGy = 1.0E-7 rd.

• Picogray [pGy]: 1 pGy = 1.0E-10 rd.

• Femtogray [fGy]: 1 fGy = 1.0E-13 rd.

• Attogray [aGy]: 1 aGy = 1.0E-16 rd.

• Rad/second [rad/s]: 1 rad/s = 0.01 Gy/s.

• Joule/kilogram/second: 1 J/(kg·s) = 1 Gy/s.

• Watt/kilogram [W/kg]: 1 W/kg = 1 Gy/s.

• Sievert/second [Sv/s]: 1 Sv/s = 1 Gy/s.

• Rem/second [rem/s]: 1 rem/s = 0.01 Gy/s.

¿Cómo funciona?

El convertidor utiliza un proceso de dos pasos:

1. Convertir a la Unidad Base:
   The input value is first converted into rad (rd) using the conversion factor of the selected “From” unit.

2. Convertir a la unidad de destino:
   The value in rad is then converted into your chosen “To” unit using its corresponding conversion factor.

This approach ensures precise and consistent conversions for all your radiation dose calculations.